You also probably know that almost every audio board driver whether on-board or off-board provides an audio-line that mixes all other audio-lines together usually under the name 'Record master' or 'Stereo Mix' or 'What'U Hear' and it's usually the first on the list of audio-lines.

When you select this mixed audio-line to be your capture source and broadcast live audio from it you can then broadcast any mixed audio you want such music + voice or voices or pre-programmed play-list+voice or voices as in interviews. You name it.

1AVCenter automatically creates a profile ready-to-use for radio broadcast called 'Broadcast Mixed Audio in Real-Time'. To select it use the 'Profile Selector', or click the 'Profile Toolbar' on the 'Broadcast Mixed Audio in Real-Time' profile, or select it from the 'Profile Menu' 'Switch To' option.

_ The capture window will be showing the contents of the Real-Time Frequency Analyzer.

_ Open 'Live Broadcast Settings' if you intend to change the transmission rate or other options.

Click on 'Start' on the 'Live Broadcast Action Toolbar'.

1AVCenter will then take about 3-5 seconds to start broadcasting.

Note that your broadcast can be accessed remotely but 'how remote' depends exclusively on the type of your IP address.

In order to make the best mix of audio lines use the Windows Mixer. To open the 'Windows Mixer' open the 'Profile Settings' dialog and click the 'Mixer' button, or go to 'Control Panel/Sounds/Advanced'.