1AVCapture Help

Router/Firewall/Proxy Considerations

To know your type of IP address open the ‘Global Options’ dialog, and click ‘Test Connectivity’. 1AVCapture will tell you what kind of IP address and connection type you have.

If your PC connects to the internet through a router/firewall/proxy, then you will need to configure port forwarding on your router so that Internet users will be able to connect to your broadcast. First you need to understand what port forwarding is: What is port forwarding?

Now that you know what port forwarding is, let us move on to the router. Your router should be some kind of box that your computer is connected to. The box might have a cable TV or phone line coming out of it. It probably has serveral flashing lights on the front of it. The cable that will run from your computer to this box is called a network cable. The ends of this cable look like the ends of a large phone cable. When you find this box, it will probably have a maker and model number on it. If you can't find the make and model number check the stickers on the bottom of the router. Write this information down. We will use it later. If you are inside a company and your PC connects to the Internet using the company firewall then you will have to request the port forwarding to your company’s network administrator.

Now what ports do you need to forward? When you open the ‘Broadcast Settings’ dialog you see a ‘Port to broadcast’ control where you select which port you want your broadcast to be, and this is the exact same port you have to set up port forwarding on. The same works for the website published by 1AVCapture web server. Don’t forget to configure port forwarding for both TCP and UDP protocols. You will see further explanations as we go.

Now that you know what port you need to forward and what router model you have then you are ready to do it. Go to:

http://portforward.com/routers.htm

Find the exact router you use and click on it. Then you wil be asked to select a program, so select ‘1st SMTP Server’, the first option. All other options will also explain.

You will be taken to a page that will explain to you how to set the port forwarding on your router. You will see that it is quite a simple process.

IMPORTANT: Don’t forget that you have to change the port used in the example by the port you actually need. For example, the default port for 1AVCapture to broadcast is 8070.

If you need any further help you can contact PCWinSoft and we will help you.